1.   BLK1043 Narrow Block (2)
2.    PNN1017 Station Pin(1 )  (8.02")    (use BMC 7.95" lg)
3.   SPA1098 Toggle Block Spacer  (2)
3a.  SPA1099 Toggle Block Spacer  (1)
4.    TGL1017-1 Long Arm (2)
5.    WAS1011-3  Trunnion Cap  (2)
       SPA1013-1  Trunnion Sleeve  (2)
6.    CYL1600  Cylinder 5 X 5 stk
7.    TGL1019-1 Long Inside Arm  (1)
       TGL1018-1 Long Inside Arm (1)
8.    PNN1016  Platen Pin  (1)  7.220"     (use BMC 7.19" lg)
9.    BLK1044  Wide Block (1)
10.  TGL1004 Short arm (4)
11.  CLA1002-1  Rod End Clamp (1)
12.  PNN1018 Center Pin (1)  6.450"      (use BMC 6.40" lg)

BSG1006  Short Arm Bushing (8)    2.00 x 2.38 x 1.25
BSG1008  Long  Arm Bushing (4)    2.00 x 2.25 x .38
BSG1007  Long  Arm Bushing (4)    1.50 x 1.75 x .38
WAS1015  1.50 X .010  Shim (6)
WAS1014  1.50 X .047  Shim (2)
WAS1008  2.00 X .010 Shim (16)
WAS1006  2.00 X .047 Shim (6)
RNG1005  2.00 Snap Ring (6)

Short arm bushings come with a grease groove but need to be installed in the short arm so the grease hole will intersect the groove. Holes are drilled through after installing the new bushing.

1.    BLK1043 Beam Block   (12)
2.    BLK1044 Platen Block (2)     
3.    TGL1004 Short arm (16)
4.    BSG1006  Short Arm Bushing  (32)
5.    SPA1114  Trunnion Sleeve (2)

6.                  Toggle Stabalizer (Inc Bushings)  (2)
   
7. BSG1503 Stabalizer bushing (4)
   

17. Trunion Cap (2)
    
18. Trunion Spacer (2)
    
19. Spacer (2)  3" OD x 2" ID
    
20. SPA1099 Toggle Block Spacer  (1)  1"
    
21. SPA1098 Toggle Block Spacer  (2)   .500
    

** We Accept **