1.    BLK1002   Station Block (1)
2.    PNN1020   Station Pin (1)     10.14" lg     
3.    TGL1013 Cylinder Rod Lock (1)
4.    ARM1002-1  Long Outside / Inside Arm (4)
5.    WAS1011-1  Trunnion Cap (2)
6.    CYL1027-8  Cylinder  5 x 5 (rear trunnion)
        SPA1096-1    Trunnion Spacer (2)
        SPA1027-1    Trunnion Spacer (2)
7.    SEE #4
8.    PNN1019  Platen Pin  (1)  9.375" lg       
9.    BLK1032  Platen Block  (1)
10.  TGL1005  Short Arm  (4)
11.  CLA1003  Rod End Clamp (1)
12.  PNN1021  Center Pin  (1)  8.00" lg

BSG1010  Short Arm Bushing  (8)
    2.50 x 2.88 x 1.50
BSG1011 Long  Arm Bushing  (4)
    2.50 x 2.88 x .38
BSG1007  Long  Arm Bushing   (4)   
    1.50 x 1.75 x .38
WAS1015  1.50 X .010  Shim (6)
WAS1014  1.50 X .047  Shim (4)
WAS1002  2.50 X .010 Shim (16)
WAS1007  2.50 X .047 Shim (6) RNG1008  2.50 Snap Ring (6)

We Repair this size toggle with new pins, bushings, cylinders etc.
Give us a call for details…...

Click photo to see full scale

KIT

Kit comes with enough parts to repair (1) one toggle.
Pins, bushings, shims and snap rings.
(items are also sold separately) see above.

Short arm bushings come with a grease groove but need to be installed in the short arm so the grease hole will intersect the groove. Holes are drilled through after installing the new bushing.

TGL1001 ...... 2 1/2" Pin Diameter

Note:
   Cylinders are Heavy Duty with steel barrel.
   Pins are harden and ground to size.
   Pin length  shown is an overall dimension.
   Bushings shown as I.D, O.D. and length.
   Short & long arms have bushings installed.

TPS inc.
ph 800-722-2997    989-435-3800
fax 989-435-3825
email:  tps@ejourney.com
www.thermoformerparts.com

Next

Previous

Page A18