Click on any item to add to the quote cart

Dimensions shown as:
           O.D. ,  I.D.  &  Length

1. BSG1003       Connecting Rod Bearing 3.25 x 3.00 x 3.44
2. BSG1002       Main Bearing Inboard 4.00 x 3.50 x 4.12
3. BSG1001       Main Bearing Outboard 4.00 x 3.50 x 3.25
4. BSG1004       Slide Rod Bearing 3.25 x 3.00 x 3.50

5. NUT1004    Small Nut
6. NUT1005    Large Nut
7. SLE1005     Sleeve Nut
8. RDD1037    Guide Rod 3.00 x 43
9.   PNN1006      Yoke Pin
10. BSG1025      Yoke Pin Bushing 1.75 x 1.50 x 2.00
11. SHA1067   Main Shaft 3.50 x 18.5 taper one end
      SHA1087   Main Shaft 3.50 x 17.40 straight shaft
      SHA1102    Main Shaft 3.50 x 15.95 w/5.00 bell one end
12. YKK1001    Yoke
13. WAS1010   Thrust washer
14.  ARM1015 Connecting rod arm w/optional pin
        ARM1019  Connecting rod w/ split cap & bolt on pin

11.

The old style main shaft had the tapered end, if you have a shaft which broke and galled the inside of the tapered flywheel it is possible to re-machine for a straight shaft or better yet #SHA1102.